580010
620050
570900
CLUTCH SPRING COMPRESSOR ADAPTOR
91-05 XL,91-03 Buell, Exc 1125R
Use with Clutch Spring Compressor Tool 580010
PRODUCT IN STOCK
$26.00
CLUTCH SPRING COMPRESSOR TOOL
1990-1997 Big Twins
Designed to release the pressure plate for removal and installation of retainer ring for clutch replacement
PRODUCT IN STOCK
$63.50
580020
PRIMARY DRIVE LOCKING TOOL
All Big Twins, Except 06 Dyna, 07-Up Big Twins
Designed to lock the primary chain for removal & installation of the engine sprocket nut
HD-41214
PRODUCT IN STOCK
$25.95
580040
PRIMARY DRIVE LOCKING BAR
4 Speed Big Twins, 5 Speed FXST
Use to lock the primary chain for removal & installation of the sprocket nut & clutch nut
PRODUCT IN STOCK
$26.00
580050
PRIMARY DRIVE LOCKING BAR
5 Speed FXR & FLT Big Twins
Use to lock the primary chain for removal & installation of the sprocket nut & clutch nuts
PRODUCT IN STOCK
$15.00
620010
TRAP DOOR PULLER
5 & 6 Speed Trans 80-06 Big Twins, Except 06 Dyna
Designed to remove the trap door and gear set from the transmission case
PRODUCT IN STOCK
$56.00
620020
TRANS SPROCKET LOCKING TOOL
1980-Present Big Twins
Designed to lock the trans belt sprocket for removal & installation of the sprocket nut. Tool is adjustable for 30 to 34 tooth pulleys.
HD-41184
PRODUCT IN STOCK
$91.50
620030
MAINSHAFT SPROCKET WRENCH
36-06 Big Twins, Except 06 Dyna
Designed to remove & install the 1 7/8" nut locking the trans belt pulley in position
HD-94660-37B
PRODUCT IN STOCK
$82.50
620060
MAINSHAFT BEARING RACE TOOL
5 & 6 Speed Trans 84-Present Big Twins
Designed to remove & install the mainshaft bearing race. Horseshoe has been re-designed for better clearance
HD-34902-B
PRODUCT IN STOCK
$133.50
620070
MAIN DRIVE GEAR & BEARING KIT
5 & 6 Speed Trans, 87-06 Big Twins, Except 06 Dyna
A complete kit to remove & install the main drive gear & main case bearing
PRODUCT IN STOCK
$179.00
620080
MAIN DRIVE GEAR SEAL INSTALLER
80-06 Big Twins, Except 06 Dyna
Designed to install the main drive gear seal perfectly straight and to the proper depth. Pilot Supplied
HD-41405
PRODUCT IN STOCK
$55.95
620090
DRIVE GEAR BEARING & SEAL INSTALLER
1980-1990 5-Speed Big Twins
Designed to install drive gear bearings to the proper depth & seal with gear out of transmission
OUT OF STOCK
$31.00
620100
DRIVE GEAR BEARING & SEAL INSTALLER
1991-2006 Big Twins, Except 06 Dyna, Sportster & Buell 1991-2005
Designed to install drive gear bearings to the proper depth & seal with gear out of transmission
HD-37842-A
PRODUCT IN STOCK
$31.00
620120
Trans Cover Bearing Remover & Installer
5 & 6 Speed Trans, 80-98 Big Twins
Use to remove & install trap door bearings and pull trap door leaving shafts in the trans case
PRODUCT IN STOCK
$88.00
620130
TRANS SHAFT INSTALLER TOOL
5 & 6 Speed, 80-Present Big Twins
Use to install the mainshaft & counter shaft into the trap door by pushing on the ID of the bearings
PRODUCT IN STOCK
$44.95
620140
Trans Cover Bearing Remover & Installer
99-06 Big Twins, Except 06 Dyna
Use to remove & install trap door bearings and pull trap door leaving shafts in the trans case
PRODUCT IN STOCK
$110.95
620160
Shifter Shaft Seal Installer
1980-2006 Big Twins, Except o6 Dyna
Use to install the shifter shaft seal in the transmission case. Tool is piloted to insure no damaged to seal during installation
PRODUCT IN STOCK
$24.95
MSINSHAFT SEAL INSTALLER (Large Seal)
87-06 Big Twins, Except 06 Dyna
Use to install the large trans case main drive gear seal. Positions seal at .050 below the case surface.. Use with driver handle from 620080.
PRODUCT IN STOCK
$56.25
590070
PRIMARY BEARING REMOVER & INSTALLER
84-06 FXST/FLST 85-06 FLT/FLHT/FXR/FXD/FXDWG
Designed to remove & install the bearing in the inner primary perfectly straight and also installs the primary bearing seal.
PRODUCT IN STOCK
$95.90
590020
STARTER JACKSHAFT SEAL INSTALLER
1994-2006 Big Twins except 06 Dyna
Designed to install the starter jackshaft seal without damaging the seal. Can be used without removal of the clutch basket or the inner primary.
PRODUCT IN STOCK
$49.95